Specification
MFS 8/9.8B: Overall Height (UL)
1304 mm (in: 51.3) conditions={"model":"MFS 8/9.8B","transom":"UL"}
Specification
1304 mm (in: 51.3) conditions={"model":"MFS 8/9.8B","transom":"UL"}
Open chat with this engine and topic preloaded so you can troubleshoot faster.
Ask Boat Guru about thisProcedure · 1. Before beginning the running test, confirm the boat with maximum capacity loading floats in a proper attitude. 2. Check the position of the water surface on the driveshaft housing. The anti-ventilation plate should...
Diagnostic · Cause: Transom too high or too low
Spec · 1304 mm (51.3 in) conditions={"transom":"UL (Ultra Long)"}
Procedure · 1. Place the shift lever in Neutral or Forward. 2. Hold the tilt handle provided at the rear of the top cowl and fully tilt the motor up toward you. 3. Slightly lower the motor to lock it in the up (tilt-lock) position.
Diagnostic · Cause: Trim angle set too low (excessive trim down) Test: Observe hull attitude relative to horizontal water surface during slow-speed operation Expected: Hull horizontal; anti-ventilation plate parallel to water surface