Procedure
1. Place the shift lever in Neutral or Forward. 2. Hold the tilt handle provided at the rear of the top cowl and fully tilt the motor up toward you. 3. Slightly lower the motor to lock it in the up (tilt-lock) position.
Open chat with this engine and topic preloaded so you can troubleshoot faster.
Ask Boat Guru about thisSpec · ~40 degrees conditions={"type":"Manual tilt (MF, EF type)","shift_lever":"Neutral or Forward"}
Diagnostic · Cause: Entrapped air in the Power Tilt unit Test: Perform air purging procedure: set manual release valve to Manual, tilt motor up/down 5–6 times manually, then close valve to Power side
Spec · Oil level must reach the bottom line of the plug hole conditions={"motorPosition":"Tilted up and locked with tilt stopper","tankPosition":"Vertical"}
Procedure · 1. Place the shift lever in Neutral or Forward position. 2. Hold the tilt handle provided at the rear of the top cowl and fully tilt the motor up toward you. WARNING: Do not place your hand between the swivel bracket ...
Diagnostic · Cause: Idle speed is elevated during engine warm-up Test: Attempt to shift to neutral; if unsuccessful, stop engine, shift to neutral manually, then restart to continue warm-up