Specification
MFS 9.8B: Max Output (MFS 9.8B)
7.2 kW (PS: 9.8) conditions={"model":"MFS 9.8B"}
Specification
7.2 kW (PS: 9.8) conditions={"model":"MFS 9.8B"}
Open chat with this engine and topic preloaded so you can troubleshoot faster.
Ask Boat Guru about thisProcedure · 1. Place the engine in a vertical position. 2. Remove the top cowl. 3. Remove the dipstick. 4. Wipe oil off the dipstick with a clean cloth. 5. Insert the dipstick into the hole completely. 6. Remove the dipstick agai...
Diagnostic · Cause: Engine load became too light, causing over-revolution Test: Buzzer sounds; High Speed ESG activated — spark plug ignition suppressed; engine speed controlled under 6300 rpm
Spec · 5.9 kW (PS: 8) conditions={"model":"MFS 8B"}
Procedure · 1. Run outboard motor at Idle throttle position for 1–10 minutes. WARNING: Do not operate in a closed area or area with insufficient ventilation. Exhaust gas contains carbon monoxide. 2. Run at less than 1/2 throttle ...
Diagnostic · Cause: Load on engine becomes light, triggering High Speed ESG which suppresses ignition to limit speed Test: Check propeller for bent or damaged blades Expected: Engine speed controlled under 6300 min⁻¹ (rpm)