Specification
Oil filter: Oil filter torque
24 Nm conditions={"alternative_imperial":"17 ft-lb","alternative_metric":"2.4 kgf-m"}
Specification
24 Nm conditions={"alternative_imperial":"17 ft-lb","alternative_metric":"2.4 kgf-m"}
Open chat with this engine and topic preloaded so you can troubleshoot faster.
Ask Boat Guru about thisProcedure · 1. Tighten the oil filter to the correct torque. (torque: 24 Nm) WARNING: If a torque wrench is not available, a good estimate is 3/4 to 1 full turn past finger-tight. Have the oil filter adjusted to the correct torqu...
Diagnostic · Cause: Normal dilution from extended idling or trolling, especially in cooler water temperatures Test: Check operating conditions and oil consistency
Spec · 24 N·m conditions={"also":"17 ft·lb, 2.4 kgf·m"}
Procedure · 1. Stop the engine and allow it to cool. 2. Tilt up the outboard motor and lock the tilt with the tilt stopper. 3. Turn the steering on the outboard motor so that the drain hole is facing downward. 4. Put an oil drain...
Diagnostic · Cause: Use of improper oil