Specification
Outboard Motor: Break-In Phase 2 Duration
10 min – 2 hrs conditions={"throttlePosition":"Less than 1/2 throttle","phase":"2"}
Specification
10 min – 2 hrs conditions={"throttlePosition":"Less than 1/2 throttle","phase":"2"}
Open chat with this engine and topic preloaded so you can troubleshoot faster.
Ask Boat Guru about thisProcedure · 1. Run outboard motor at Idle throttle position for 1–10 minutes. WARNING: Do not operate in a closed area or area with insufficient ventilation. Exhaust gas contains carbon monoxide. 2. Run at less than 1/2 throttle ...
Diagnostic · Cause: Possible mechanical issue with new outboard motor or lower unit moving components Test: Discontinue operation immediately and have dealer inspect the product
Spec · 10 min – 2 hrs conditions={"throttlePosition":"Less than 1/2 throttle"}
Procedure · 1. Run the outboard motor at idle throttle position for the first 1–10 minutes. WARNING: Do not operate the outboard motor in a closed area or area with no forced ventilation. Exhaust gas contains carbon monoxide whic...
Diagnostic · Cause: Possible water contamination in gear oil Test: Inspect gear oil color during oil change or inspection