Specification
Outboard Motor: Break-In Phase 4 Speed
Approx. 4000 rpm conditions={"duration":"3–10 hrs","throttlePosition":"3/4 throttle","fullThrottleInterval":"2 min every 10 min"}
Specification
Approx. 4000 rpm conditions={"duration":"3–10 hrs","throttlePosition":"3/4 throttle","fullThrottleInterval":"2 min every 10 min"}
Open chat with this engine and topic preloaded so you can troubleshoot faster.
Ask Boat Guru about thisProcedure · 1. Run outboard motor at Idle throttle position for 1–10 minutes. WARNING: Do not operate in a closed area or area with insufficient ventilation. Exhaust gas contains carbon monoxide. 2. Run at less than 1/2 throttle ...
Diagnostic · Cause: Improper thrust rod position
Spec · 3–10 hrs conditions={"throttlePosition":"3/4 throttle","speed":"Approx. 4000 rpm; full throttle allowed for 2 min every 10 min","phase":"4"}
Procedure · 1. Run the outboard motor at idle throttle position for the first 1–10 minutes. WARNING: Do not operate the outboard motor in a closed area or area with no forced ventilation. Exhaust gas contains carbon monoxide whic...
Diagnostic · Cause: Ignition timing incorrect