Specification
Outboard Motor: Break-In Phase 5 Duration
After 10 hrs conditions={"throttlePosition":"Full throttle available","phase":"5"}
Specification
After 10 hrs conditions={"throttlePosition":"Full throttle available","phase":"5"}
Open chat with this engine and topic preloaded so you can troubleshoot faster.
Ask Boat Guru about thisProcedure · 1. Run outboard motor at Idle throttle position for 1–10 minutes. WARNING: Do not operate in a closed area or area with insufficient ventilation. Exhaust gas contains carbon monoxide. 2. Run at less than 1/2 throttle ...
Diagnostic · Cause: Possible mechanical issue with new outboard motor or lower unit moving components Test: Discontinue operation immediately and have dealer inspect the product
Spec · After 10 hrs conditions={"throttlePosition":"Full throttle available"}
Procedure · 1. Run the outboard motor at idle throttle position for the first 1–10 minutes. WARNING: Do not operate the outboard motor in a closed area or area with no forced ventilation. Exhaust gas contains carbon monoxide whic...
Diagnostic · Cause: Manual relief valve left open, releasing hydraulic pressure. Test: Verify manual relief valve is fully closed (turned away from Manual direction) before engine operation.