Specification
Propeller: 3-Blade Propeller – Mark 6.5
8.5 × 6.5 inch (diameter × pitch) conditions={"blades":"3","mm":"216 × 165","suitability":"Light boats"}
Specification
8.5 × 6.5 inch (diameter × pitch) conditions={"blades":"3","mm":"216 × 165","suitability":"Light boats"}
Open chat with this engine and topic preloaded so you can troubleshoot faster.
Ask Boat Guru about thisProcedure · 1. Reduce throttle to less than half-open and move to a safe place quickly. WARNING: Engine will run rough until throttle is reduced. 2. Stop the engine. 3. Inspect the propeller for bent or damaged blades. 4. If the ...
Diagnostic · Cause: Physical damage or wear to propeller blades Test: Visual inspection of propeller edge and blade geometry
Spec · 8.5 × 6.5 in / 216 × 165 mm diameter × pitch conditions={"blades":"3","mark":"6.5","application":"light boats"}
Procedure · 1. Move to a safe place quickly. 2. Check whether cooling water is discharged from the water check port at idle speed. 3. Stop the engine. 4. Remove any foreign matter from the gear case and propeller if necessary. 5....
Diagnostic · Cause: Load on engine becomes light, triggering High Speed ESG which suppresses ignition to limit speed Test: Check propeller for bent or damaged blades Expected: Engine speed controlled under 6300 min⁻¹ (rpm)