Specification
Propeller: 3-Blade Propeller – Mark 8.5
8.9 × 8.3 inch (diameter × pitch) conditions={"blades":"3","mm":"226 × 211","suitability":"Light boats"}
Specification
8.9 × 8.3 inch (diameter × pitch) conditions={"blades":"3","mm":"226 × 211","suitability":"Light boats"}
Open chat with this engine and topic preloaded so you can troubleshoot faster.
Ask Boat Guru about thisProcedure · 1. Place a wood block between the propeller blade and anti-ventilation plate to hold the propeller steady. 2. Remove the split pin, propeller nut, and washer. 3. Remove the propeller and thrust holder. 4. Apply waterp...
Diagnostic · Cause: Physical damage or wear to propeller blades Test: Visual inspection of propeller edge and blade geometry
Spec · 8.9 × 8.3 in / 226 × 211 mm diameter × pitch conditions={"blades":"3","mark":"8.5","application":"light boats"}
Procedure · 1. Reduce throttle to less than half-open and move to a safe place quickly. WARNING: Engine will run rough until throttle is reduced. 2. Stop the engine. 3. Inspect the propeller for bent or damaged blades. 4. If the ...
Diagnostic · Cause: Load on engine becomes light, triggering High Speed ESG which suppresses ignition to limit speed Test: Check propeller for bent or damaged blades Expected: Engine speed controlled under 6300 min⁻¹ (rpm)