Specification
Trim tab: Trim tab adjustment direction when boat veers right
Direct trim tab toward B (right from rear of boat) conditions={"location":"Under anti-ventilation plate"}
Specification
Direct trim tab toward B (right from rear of boat) conditions={"location":"Under anti-ventilation plate"}
Open chat with this engine and topic preloaded so you can troubleshoot faster.
Ask Boat Guru about thisProcedure · 1. Secure the outboard motor to the transom or a service stand before beginning adjustment. WARNING: Be sure the outboard motor is secured to transom or service stand; accidental drop or fall could lead to severe pers...
Diagnostic · Cause: Trim angle set too low (excessive trim down) Test: Observe hull attitude relative to horizontal water surface during slow-speed operation Expected: Hull horizontal; anti-ventilation plate parallel to water surface
Spec · Direct trim tab toward A (left from rear of boat) conditions={"location":"Under anti-ventilation plate"}
Procedure · 1. Ensure the outboard motor is secured to the transom or a service stand before performing any adjustment. WARNING: Be sure that the outboard motor is secured to the transom or service stand; accidental drop or fall ...
Diagnostic · Cause: Trim angle set too high Test: Observe hull attitude relative to water surface while underway Expected: Hull horizontal; anti-ventilation plate parallel to water surface