Specification
Valve Train: Intake Valve Clearance
0.13–0.17 mm (in: 0.0051–0.0067)
Specification
0.13–0.17 mm (in: 0.0051–0.0067)
Open chat with this engine and topic preloaded so you can troubleshoot faster.
Ask Boat Guru about thisProcedure · 1. Fuel System – Fuel filter: Check and clean or replace if necessary. WARNING: Intervals: First 20 hrs/1 month, Every 50 hrs/3 months, Every 100 hrs/6 months, Every 200 hrs/1 year. 2. Fuel System – Carburetor: Strip,...
Diagnostic · Cause: Incorrect valve clearance
Spec · 0.13–0.17 mm conditions={"altUnit":"0.0051–0.0067 in","type":"Intake"}
Procedure · 1. With the outboard motor installed on the boat, set the manual release valve to the MANUAL side, then tilt the outboard motor up and down manually 5–6 times. WARNING: Trapped air in the Power Tilt unit will cause po...
Diagnostic · Cause: Incorrect valve clearance