Diagnostic
Corrosion on outboard motor
Cause: Anodes excessively worn or not securely attached Test: Inspect anodes on stern bracket and gear case (p. 104)
Diagnostic
Cause: Anodes excessively worn or not securely attached Test: Inspect anodes on stern bracket and gear case (p. 104)
Open chat with this engine and topic preloaded so you can troubleshoot faster.
Ask Boat Guru about thisSpec · SG, SH, SJ, or SL conditions={"condition":"If Honda 10W-30 FC-W oil is not available","standard":"API service category"}
Procedure · 1. Check the engine oil level (p. 89). WARNING: Running the engine with a low oil level can cause engine damage. Overfilling the engine can cause it to smoke or have oil leaks, which can also cause engine damage. 2. C...
Spec · 30 seconds conditions={"phase":"Next 60 minutes","note":"Bursts OK but no continuous full-throttle"}
Procedure · 1. Locate the anodes on each side of the gear case and on the stern bracket. 2. Inspect the anodes for size reduction and structural integrity. 3. Replace the anodes when they have been reduced to about two-thirds of ...
Diagnostic · Cause: Battery connections loose or corroded Test: Inspect battery terminals for looseness or corrosion