Specification
Engine: Break-in Phase 3 full-throttle burst limit
30 seconds conditions={"phase":"Next 60 minutes","note":"Bursts OK but no continuous full-throttle"}
Specification
30 seconds conditions={"phase":"Next 60 minutes","note":"Bursts OK but no continuous full-throttle"}
Open chat with this engine and topic preloaded so you can troubleshoot faster.
Ask Boat Guru about thisProcedure · 1. Run the engine at trolling speed for the first 15 minutes. Use the minimum throttle opening necessary to operate the boat at a safe trolling speed. WARNING: Avoid continuous operation at a steady speed throughout t...
Diagnostic · Cause: Engine overheating — engine protection system engaged Test: Observe overheat indicator (RED) and buzzer activation; engine speed decrease at cruising speed is automatic
Spec · 5 minutes conditions={"phase":"Next 8 hours","note":"Do not run at full throttle for more than 5 minutes at a time"}
Procedure · 1. Turn the ignition switch key to the ON position. The buzzer will sound twice to confirm. 2. Turn the ignition switch key to the START position and hold it there until the engine starts. WARNING: Do not operate the ...
Diagnostic · Cause: Temporary overheating; cooling system otherwise functional Test: Continue idling for 30 seconds; overheat indicator should turn off and engine should respond normally to throttle control lever