Diagnostic
Cause: Residual heat triggering the engine protection system after full-throttle operation Test: Restart the engine and monitor if the protection system deactivates on its own
Open chat with this engine and topic preloaded so you can troubleshoot faster.
Ask Boat Guru about thisSpec · 20 seconds conditions={"trigger":"Overheat condition persists after initial speed reduction"}
Procedure · 1. Idle the engine in neutral and check the cooling system indicator for water flow. 2. If water is flowing from the cooling system indicator, continue idling for 30 seconds. 3. Confirm the overheat indicator turns of...
Spec · 20 seconds conditions={"trigger":"Overheat indicator activates and engine speed limited"}
Procedure · 1. During the warm-up period, check the oil pressure indicator (p. 49), overheat indicator (p. 49), and cooling system indicator (p. 50). WARNING: If the indicators show any abnormal condition, immediately stop the en...
Diagnostic · Cause: Rapid throttle closure activates engine protection system momentarily Test: Monitor engine speed after sudden throttle closure from full throttle