Diagnostic
Engine will not start
Cause: Fuel hose not primed Test: Check priming bulb
Diagnostic
Cause: Fuel hose not primed Test: Check priming bulb
Open chat with this engine and topic preloaded so you can troubleshoot faster.
Ask Boat Guru about thisSpec · Garden hose (engine OFF) conditions={"warning":"Do not run the engine during garden hose flushing"}
Procedure · 1. Locate the priming bulb on the fuel hose between the fuel tank and the outboard motor. 2. Hold the priming bulb up in the direction of the arrow marked on the bulb. 3. Squeeze the priming bulb repeatedly until it f...
Spec · 3,000 rpm conditions={"note":"Running below 3,000 rpm for more than 30% of operating time leads to water condensation and unburned fuel mixing with engine oil"}
Procedure · 1. Dry and reinstall spark plugs. 2. Start engine with the throttle open.
Diagnostic · Cause: Out of fuel Test: Check fuel level