Specification
Cooling system: Flushing method
Garden hose (engine OFF) conditions={"warning":"Do not run the engine during garden hose flushing"}
Specification
Garden hose (engine OFF) conditions={"warning":"Do not run the engine during garden hose flushing"}
Open chat with this engine and topic preloaded so you can troubleshoot faster.
Ask Boat Guru about thisProcedure · 1. After each use in salt water or dirty water, wash the outside of the outboard motor with clean, fresh water. WARNING: Do not apply water or corrosion inhibitor directly to electrical components under the engine cov...
Diagnostic · Cause: Possible cooling system fault Test: Check cooling system indicator on p. 50; stop engine immediately and refer to p. 115
Spec · 10 minutes conditions={"water_type":"fresh water","method":"flush port connector"}
Procedure · 4. Screw the flush port connector onto the garden hose. 5. Turn on the fresh water supply and flush the outboard motor for at least 10 minutes. 6. After flushing, disconnect the garden hose and reconnect the flush por...
Diagnostic · Cause: Cooling system issue or overheating condition Test: Idle the engine in neutral and check the cooling system indicator for water flow