Engine will not start

Related KB links

• Gearshift/Throttle Control Lever: gearshift_position_for_start

  Spec · N (Neutral) conditions={"requirement":"Required for engine start"}

• Engine will not start – troubleshooting

  Procedure · 1. Insert clip in emergency stop switch. 2. Shift control lever to neutral position. 3. Leave fast idle lever in the OFF position (side-mount type only).

• Fast Idle Lever: fast_idle_lever_neutral_required

  Spec · N (Neutral) conditions={"description":"Control lever position required for fast idle lever operation"}

• Starting the Engine via Ignition Switch (DBW Type, without START/STOP switch)

  Procedure · 1. Ensure the gearshift/throttle control lever is in the N (neutral) position (refer to p. 56). WARNING: Engine will not start if lever is not in neutral. 2. Confirm the emergency stop switch clip is inserted into the...

• Engine will not start

  Diagnostic · Cause: Control lever is not in the N (neutral) position; F (forward) or R (reverse) gear is engaged Test: Confirm the control lever is set to the N (neutral) position before attempting to start