Diagnostic
Malfunction indicator (RED) illuminates and buzzer sounds at one-second intervals
Cause: Engine control system has detected a malfunction Test: Inspect engine control system for fault codes or malfunctions
Diagnostic
Cause: Engine control system has detected a malfunction Test: Inspect engine control system for fault codes or malfunctions
Open chat with this engine and topic preloaded so you can troubleshoot faster.
Ask Boat Guru about thisSpec · Malfunction, Oil Pressure, Overheat conditions={"event":"After second buzzer beep on ignition ON"}
Procedure · 1. Note that the oil pressure indicator has gone off and the buzzer has sounded — the engine protection system is now limiting engine speed. WARNING: Do not ignore this warning. Continued operation with low oil pressu...
Spec · 20 seconds conditions={"trigger":"Overheat indicator activates and engine speed limited"}
Procedure · 1. Ensure all remote control levers are in the NEUTRAL position. 2. Press and hold the [+] switch while all remote control levers are in NEUTRAL. 3. Confirm activation: a long buzz sounds once and the SYNC indicator c...
Diagnostic · Cause: Engine overheating detected; engine speed reduced to 1,800 rpm Test: Check for clogged water intakes; monitor cooling system indicator for water flow