Procedure
1. Ensure all remote control levers are in the NEUTRAL position. 2. Press and hold the [+] switch while all remote control levers are in NEUTRAL. 3. Confirm activation: a long buzz sounds once and the SYNC indicator comes on. The mode is now in one-lever mode, allowing a single remote control lever to shift gear and adjust engine speed for all outboard motors.
Open chat with this engine and topic preloaded so you can troubleshoot faster.
Ask Boat Guru about thisSpec · NEUTRAL, FORWARD, REVERSE
Diagnostic · Cause: One or more remote control levers may not be in NEUTRAL position Test: Verify all remote control levers are in the NEUTRAL position before attempting station transfer
Spec · 20 seconds conditions={"trigger":"Overheat indicator activates and engine speed limited"}
Procedure · 1. Place all gearshift/throttle control levers in the NEUTRAL position. 2. Press and hold the [+] switch until one-lever mode is engaged. 3. Use the single gearshift/throttle control lever to shift gears and adjust en...
Diagnostic · Cause: Outboard motor trimmed or tilted up excessively, or propeller ventilation during a sharp turn Test: Check trim angle of outboard motor; verify correct propeller is installed