Procedure
1. Place all gearshift/throttle control levers in the NEUTRAL position. 2. Press and hold the [+] switch until one-lever mode is engaged. 3. Use the single gearshift/throttle control lever to shift gears and adjust engine speed on all outboard motors simultaneously.
Open chat with this engine and topic preloaded so you can troubleshoot faster.
Ask Boat Guru about thisSpec · NEUTRAL, FORWARD, REVERSE
Diagnostic · Cause: One or more remote control levers may not be in NEUTRAL position Test: Verify all remote control levers are in the NEUTRAL position before attempting station transfer
Spec · 3 outboard motors conditions={"type":"TRIPLE TYPE","positions":"PORT, CENTER, STARBOARD","UP":"Raises bow","DN":"Lowers bow"}
Procedure · 1. Place all gearshift/throttle control levers in the NEUTRAL position. 2. At the inactive station you wish to activate, press and hold the [-] switch until station select mode transfers control to that station.
Diagnostic · Cause: Possible low oil pressure or oil system fault Test: Check oil pressure indicator on p. 49; stop engine immediately and refer to p. 115