Procedure
Activate Trolling Mode
1. Ensure the vessel is cruising with the throttle closed. 2. Press and hold the [+] switch until trolling mode is engaged. 3. Use the [-] and [+] switches to adjust engine speed while in trolling mode.
Procedure
1. Ensure the vessel is cruising with the throttle closed. 2. Press and hold the [+] switch until trolling mode is engaged. 3. Use the [-] and [+] switches to adjust engine speed while in trolling mode.
Open chat with this engine and topic preloaded so you can troubleshoot faster.
Ask Boat Guru about thisSpec · 50 min⁻¹ (rpm) conditions={"action":"single switch press"}
Diagnostic · Cause: Oil pressure has dropped below safe threshold; oil pressure indicator is equipped with a buzzer that activates when indicator goes off Test: Verify oil pressure indicator status and buzzer activation together
Spec · 650 min⁻¹ (rpm) conditions={"throttle":"fully closed","engine":"warmed up","trigger":"[+] switch held"}
Procedure · 1. Ensure the gearshift/throttle control lever is in the NEUTRAL position. 2. Press and hold the [-] switch. 3. While holding the [-] switch, turn the gearshift/throttle control lever forward past the shift point. WAR...
Diagnostic · Cause: Rev limiter activation due to excessive tilt angle or propeller ventilation during sharp turn Test: Check trim angle of the outboard motor