Specification
Trolling Mode: Trolling Mode Entry Engine Speed
650 min⁻¹ (rpm) conditions={"throttle":"fully closed","engine":"warmed up","trigger":"[+] switch held"}
Specification
650 min⁻¹ (rpm) conditions={"throttle":"fully closed","engine":"warmed up","trigger":"[+] switch held"}
Open chat with this engine and topic preloaded so you can troubleshoot faster.
Ask Boat Guru about thisProcedure · 1. Ensure the vessel is cruising with the throttle closed. 2. Press and hold the [+] switch until trolling mode is engaged. 3. Use the [-] and [+] switches to adjust engine speed while in trolling mode.
Diagnostic · Cause: Overheat protection system triggered due to insufficient warm-up Test: Allow engine to warm up fully before increasing speed; monitor overheat indicator
Spec · 650 min⁻¹ (rpm)
Procedure · 1. Run the engine at trolling speed for the first 15 minutes. Use the minimum throttle opening necessary to operate the boat at a safe trolling speed. WARNING: Avoid continuous operation at a steady speed throughout t...
Diagnostic · Cause: Engine not properly warmed up; overheat protection triggered Test: Allow engine to complete proper warm-up cycle and retry