Trolling Mode: Trolling Mode Minimum Engine Speed

Related KB links

• Activate Trolling Mode

  Procedure · 1. Ensure the vessel is cruising with the throttle closed. 2. Press and hold the [+] switch until trolling mode is engaged. 3. Use the [-] and [+] switches to adjust engine speed while in trolling mode.

• Overheat indicator (RED) comes on and buzzer sounds a steady tone

  Diagnostic · Cause: Engine overheating detected; engine speed reduced to 1,800 rpm Test: Check for clogged water intakes; monitor cooling system indicator for water flow

• Trolling Mode: Trolling Mode Entry Engine Speed

  Spec · 650 min⁻¹ (rpm) conditions={"throttle":"fully closed","engine":"warmed up","trigger":"[+] switch held"}

• Engine Break-In Procedure

  Procedure · 1. Run the engine at trolling speed for the first 15 minutes. Use the minimum throttle opening necessary to operate the boat at a safe trolling speed. WARNING: Avoid continuous operation at a steady speed throughout t...

• Cooling system freezes

  Diagnostic · Cause: Ambient temperature at or below 32°F (0°C); cruising at high speed without proper engine warm-up