Procedure

Starting the Engine – Flush-Mount Type / Top-Mount Type (DBW type)

1. Put the emergency stop switch clip into the emergency stop switch, and attach the emergency stop switch lanyard securely to the operator or to the operator's PFD (Personal Flotation Device). WARNING: The engine will not start or run unless the emergency stop switch clip is in the emergency stop switch. Always attach the emergency stop switch lanyard securely to the operator or to the operator's PFD before starting the engine. The emergency stop switch clip and lanyard system is a safety device that will stop the engine if you fall away from the controls while operating the boat. 2. Set the remote control lever in the N (neutral) position. WARNING: The engine will not start if the F (forward) or R (reverse) gears are engaged.