Procedure
1. If water is present in the fuel filter with water separator, refer to the fuel filter with water separator replacement procedure to remove the strainer cup and empty the water from the inside of the cup. Parts: Strainer Cup
Open chat with this engine and topic preloaded so you can troubleshoot faster.
Ask Boat Guru about thisSpec · 2.5 lbf·ft conditions={"also_expressed_as":"3.4 N·m, 0.35 kgf·m"}
Diagnostic · Cause: Excessive sediment or debris in the fuel system Test: Visual inspection through translucent strainer cup; refer to replacement/cleaning procedure (p. 102)
Spec · 3,000 rpm conditions={"note":"Running below 3,000 rpm for more than 30% of operating time leads to water condensation and unburned fuel mixing with engine oil"}
Procedure · 1. Remove the engine cover (refer to p. 88). 2. Disconnect the 2-pin coupler (blue). 3. Remove the suspension strap from the fuel filter with water separator bracket, and then remove the suspension strap from the fuel...
Diagnostic · Cause: Water or sediment accumulation in the fuel filter with water separator Test: Inspect fuel filter with water separator for water or sediment accumulation