Specification
Fuel Filter with Water Separator: Fuel Filter with Water Separator Cup Screw Tightening Torque
2.5 lbf·ft conditions={"also_expressed_as":"3.4 N·m, 0.35 kgf·m"}
Specification
2.5 lbf·ft conditions={"also_expressed_as":"3.4 N·m, 0.35 kgf·m"}
Open chat with this engine and topic preloaded so you can troubleshoot faster.
Ask Boat Guru about thisProcedure · 1. Remove the three screws holding the fuel filter with water separator. 2. Empty the water or deposits from the inside of the cup. 3. Thoroughly clean the cup and replace with a new fuel filter. 4. Reassemble the fue...
Diagnostic · Cause: Excessive sediment or debris in the fuel system Test: Visual inspection through translucent strainer cup; refer to replacement/cleaning procedure (p. 102)
Spec · 9 lbf·ft conditions={"also":"12 N·m, 1.2 kgf·m","method":"Hand-tight until contact, then 7/8 turn additional with suitable tool"}
Procedure · 1. Remove the engine cover (refer to p. 88). 2. Disconnect the 2-pin coupler (blue). 3. Remove the suspension strap from the fuel filter with water separator bracket, and then remove the suspension strap from the fuel...
Diagnostic · Cause: Contaminated fuel or prolonged service interval Test: Visually inspect through the translucent strainer cup for water or sediment accumulation