Specification
Engine: Break-in Phase 1 duration
15 minutes conditions={"phase":"First 15 minutes","speed":"Trolling speed","throttle":"Minimum necessary for safe trolling"}
Specification
15 minutes conditions={"phase":"First 15 minutes","speed":"Trolling speed","throttle":"Minimum necessary for safe trolling"}
Open chat with this engine and topic preloaded so you can troubleshoot faster.
Ask Boat Guru about thisProcedure · 1. Run the engine at trolling speed for the first 15 minutes. Use the minimum throttle opening necessary to operate the boat at a safe trolling speed. WARNING: Avoid continuous operation at a steady speed throughout t...
Diagnostic · Cause: Engine was not sufficiently warmed up before raising engine speed Test: Check warm-up duration and fast idle lever position prior to throttle increase
Spec · 5 minutes conditions={"phase":"Next 8 hours","note":"Do not run at full throttle for more than 5 minutes at a time"}
Procedure · 1. Move the control lever(s) to the N (neutral) position. 2. After cruising at full throttle, cool down the engine by idling for a few minutes before stopping the engine. 3. Push the START/STOP switch to stop the engi...
Diagnostic · Cause: Engine not sufficiently warmed up before engine speed was raised Test: Check warm-up duration and fast idle lever usage prior to increasing RPM