Painted/metal surfaces: Recommended corrosion protection product

Related KB links

• Cleaning and Flushing the Outboard Motor (Garden Hose Method)

  Procedure · 1. After each use in salt water or dirty water, wash the outside of the outboard motor with clean, fresh water. WARNING: Do not apply water or corrosion inhibitor directly to electrical components under the engine cov...

• Engine will not start

  Diagnostic · Cause: Battery connections loose or corroded Test: Inspect battery terminals for looseness or corrosion

• Fuel System: Maximum Methanol Content

  Spec · 5 % conditions={"requirement":"must contain cosolvents and corrosion inhibitors"}

• Lubrication of Outboard Motor Components

  Procedure · 1. Apply Honda Marine waterproof grease to the following lubrication points: PTT Thrust Receiver (each side), Swivel, Propeller Shaft, Tilt Lock Lever/Shaft Cam, Shift Arm/Click Roller/Neutral Switch, Tilt Shaft, Thro...

• Low oil pressure - Engine protection system activated due to low oil pressure

  Diagnostic · Cause: Low engine oil level or lubrication system fault Test: Stop engine, check engine oil level (p.89), add oil if needed, restart engine and verify oil pressure indicator comes on within 30 seconds