Power Trim/Tilt Switch: trim_tilt_switch_positions

Related KB links

• Normal Key Type - Engine / Power Shutdown

  Procedure · 1. Turn the power switch key to the OFF position. 2. Remove the power switch key and store it safely.

• Propeller ventilation, overheating, or water pump damage

  Diagnostic · Cause: Excessive trim/tilt angle during operation

• Power Trim/Tilt Switch Panel: PTT Switch Panel – Dual Type Configuration

  Spec · 2 outboard motors conditions={"type":"DUAL TYPE","UP":"Raises bow","DN":"Lowers bow"}

• Engine Starting Procedure – Normal Key with START/STOP Switch Type

  Procedure · 1. Insert the key into the power switch and turn it to the ON position. 2. Push the START/STOP switch to start the engine.

• Rev limiter engaged - Engine speed unstable at high speed

  Diagnostic · Cause: Rev limiter activation due to excessive tilt angle or propeller ventilation during sharp turn Test: Check trim angle of the outboard motor