Diagnostic
Cause: Obstruction in the cooling water intake, water pump failure, or blockage in the cooling system Test: Visually inspect the water pump indicator hole for a steady stream of water after engine start; check cooling water intake for obstruction
Open chat with this engine and topic preloaded so you can troubleshoot faster.
Ask Boat Guru about thisSpec · 1 in conditions={"engine_state":"running at idle speed"}
Procedure · 1. Shift the outboard to the neutral (N) position. 2. Turn the ignition key to the START position and release the key. The electronic starting system will automatically crank the engine for starting. 3. If the engine ...
Spec · 25.4 mm conditions={"engine_state":"running at idle speed"}
Procedure · 1. Keep the outboard tilted down at all times so the gearcase is submerged when operating or moored in freezing or near-freezing temperatures. This prevents trapped water in the gearcase from freezing and damaging the...
Diagnostic · Cause: Hull or transom fracture from submerged object strike Test: Inspect hull and transom for fractures; if leaks found, immediately activate bilge pump