Specification
Exhaust relief hole: Exhaust relief hole minimum height above waterline (idle)
1 in conditions={"engine_state":"running at idle speed"}
Specification
1 in conditions={"engine_state":"running at idle speed"}
Open chat with this engine and topic preloaded so you can troubleshoot faster.
Ask Boat Guru about thisProcedure · 1. Check whether the exhaust relief hole on the outboard is submerged when the engine is trimmed full in while running at idle speed. WARNING: If the exhaust relief hole becomes submerged, it may result in exhaust res...
Diagnostic · Cause: Exhaust restriction due to exhaust relief hole being below the waterline Test: Verify exhaust relief hole is at least 25.4 mm (1 in.) above waterline with engine running at idle speed
Spec · 25.4 mm conditions={"engine_state":"running at idle speed"}
Procedure · 1. Use the mounting height chart (diagram 47710) to determine recommended mounting height based on anticipated maximum boat speed (MPH). The solid reference line (a) is the primary recommendation. 2. For dual outboard...
Diagnostic · Cause: Exhaust gas mixing with water over the propeller blades due to worn, loose, or damaged propeller bore sleeve Test: Inspect propeller bore sleeve when propeller is removed; check for wear, looseness, or broken r...