Procedure
Disengaging the Tilt Support Lever
1. Raise the outboard off the tilt support lever (a) to disengage it. 2. Rotate the tilt support lever (a) down using the knob (b). 3. Lower the outboard.
Procedure
1. Raise the outboard off the tilt support lever (a) to disengage it. 2. Rotate the tilt support lever (a) down using the knob (b). 3. Lower the outboard.
Open chat with this engine and topic preloaded so you can troubleshoot faster.
Ask Boat Guru about thisSpec · First 20° conditions={"usage":"Operating the boat on plane"}
Diagnostic · Cause: Trapped water in the gearcase freezing when outboard is tilted up in freezing temperatures
Spec · Tighten until it seats, then back off 1/4 turn conditions={"application":"Steering link rod to steering cable assembly"}
Procedure · 1. Shut off the engine. WARNING: Do not attempt to tilt the outboard while the engine is running. 2. Press the trim/tilt switch or auxiliary tilt switch to the UP position. The outboard will tilt up until the switch i...
Diagnostic · Cause: Ice forming inside the driveshaft housing, blocking water passages to the engine