Diagnostic
Blocked water flow to engine / overheating
Cause: Ice forming inside the driveshaft housing, blocking water passages to the engine
Diagnostic
Cause: Ice forming inside the driveshaft housing, blocking water passages to the engine
Open chat with this engine and topic preloaded so you can troubleshoot faster.
Ask Boat Guru about thisSpec · 2000 RPM conditions={"operation":"Outboard in tilt range"}
Procedure · 1. Keep the outboard tilted down at all times so the gearcase is submerged when operating or moored in freezing or near-freezing temperatures. This prevents trapped water in the gearcase from freezing and damaging the...
Spec · 2000 RPM conditions={"operation":"Shallow water tilt mode","note":"If engine speed exceeds 2000 RPM, outboard will automatically return down to maximum trim range"}
Procedure · 1. Ensure a sufficient supply of cooling water is provided to the water inlets during any engine operation performed as part of storage preparation. WARNING: Without sufficient cooling water, the engine, water pump, a...
Diagnostic · Cause: Cooling water intake holes are above the waterline due to excessive trim-out