Procedure
Flywheel Cover Removal
1. Lift the cover off the four mounting pins (two on each side of the engine).
Procedure
1. Lift the cover off the four mounting pins (two on each side of the engine).
Open chat with this engine and topic preloaded so you can troubleshoot faster.
Ask Boat Guru about thisSpec · Tighten until it seats, then back off 1/4 turn conditions={"application":"Steering link rod to steering cable assembly"}
Diagnostic · Cause: Fuel is not reaching the engine
Spec · 6 Nm conditions={"lb-in":"53","lb-ft":"–","screws":"Two M6 x 30 and one M6 x 50"}
Procedure · 1. Position the cover onto the four mounting pins and secure the cover in place by pushing the cover down onto the mounting pins.
Diagnostic · Cause: Wiring or electrical connection faulty