Procedure
1. Install and secure the quick disconnect fuel hose fitting with a hose clamp. WARNING: Position the hose clamp so that it will not chafe or cut into an adjacent wiring harness. Inspect the position of the hose clamp to ensure it will not chafe or cut into the adjacent wiring harnesses.
Open chat with this engine and topic preloaded so you can troubleshoot faster.
Ask Boat Guru about thisSpec · 3.175 mm (0.125 in.) conditions={"context":"Accessory mounting plate must not rest in the radius of the transom clamp bracket","section":"Outboard Installation"}
Diagnostic · Cause: Improper reassembly or damaged fuel system component Test: Visual inspection of all serviced fuel system connections and components before starting the engine
Spec · Pull to the left conditions={"trim_direction":"Trimmed out or up","installation":"Normal installation height","propeller_rotation":"Normal right-hand rotation"}
Procedure · 1. When installing the fuel tank cap, turn the cap to the right until you hear a click. This signals that the fuel cap is fully seated. A built-in device prevents overtightening. 2. Open the manual vent screw on top o...
Diagnostic · Cause: Restricted fuel flow due to added components (filters, valves, fittings, etc.) in the fuel supply system Test: Inspect fuel supply system for any added restrictive components