Procedure

Outboard Installation – Rigging Adapter & Grommet Attachment

2. Fasten the rigging grommet and rigging adapter with two M6 x 30 screws and one M6 x 50 screw. Tighten the screws to 6 Nm (53 lb-in.). (torque: 6 Nm) 3. Secure the wiring, hoses, and cables together with a cable tie. WARNING: Inspect the position of the hose clamp located on the fuel hose to ensure that it will not chafe or cut into the adjacent wiring harnesses. Tools: Cable tie Parts: M6 x 30 screw, M6 x 50 screw, Rigging grommet, Rigging adapter, Cable tie