Procedure
1. Route the SmartCraft and/or vessel harness through the rigging grommet. 2. Connect the harness to the connector. Vessel (accessory) harness connects to connector (a); SmartCraft harness connects to connector (b).
Open chat with this engine and topic preloaded so you can troubleshoot faster.
Ask Boat Guru about thisSpec · 2 amp conditions={"fuse_label":"DIAG","fuse_number":"1"}
Diagnostic · Cause: Improper reassembly or damaged fuel system component Test: Visual inspection of all serviced fuel system connections and components before starting the engine
Spec · 35 lb-ft conditions={"side":"Starboard","routing":"Starboard Side Routed Cable","torque_Nm":"47.5","torque_lb_in":"–"}
Procedure · 1. Ensure sufficient slack exists in wiring harnesses, battery cables, and hoses routed between the rigging grommet and engine attachment points to relieve stress and prevent hoses from being kinked or pinched. WARNIN...
Diagnostic · Cause: Alcohol content in gasoline absorbing moisture, causing water and alcohol to separate from gasoline in fuel tank Test: Inspect fuel system components for corrosion or deterioration; verify alcohol content does ...