Procedure
1. Lower the top cowl over the engine. 2. Bring the front of the cowl down first and engage the front cowl hook. 3. Lower the cowl into the seated position and apply pressure to the back of the cowl to lock it in place. 4. Ensure the cowl is securely fastened by trying to pull up on the back of the cowl.
Open chat with this engine and topic preloaded so you can troubleshoot faster.
Ask Boat Guru about thisSpec · Within cross-hatched region between bottom bar and top bar conditions={"note":"Do not attempt to fill to the top of the operating range; oil is correct as long as it appears anywhere within the cross-hatched region"}
Diagnostic · Cause: Obstruction in water intake holes in lower unit Test: Stop engine and inspect water intake holes in lower unit for obstruction
Spec · Pull to the left conditions={"trim_direction":"Trimmed out or up","installation":"Normal installation height","propeller_rotation":"Normal right-hand rotation"}
Procedure · 1. Unlock the top cowl by pulling out on the rear cowl latch. 2. Lift the top cowl off the engine.
Diagnostic · Cause: Faulty lanyard stop switch Test: Start the engine and pull the lanyard cord; verify engine stops