Specification
Cooling System: Flush duration
15 minutes conditions={"water_tap_setting":"½ maximum"}
Specification
15 minutes conditions={"water_tap_setting":"½ maximum"}
Open chat with this engine and topic preloaded so you can troubleshoot faster.
Ask Boat Guru about thisProcedure · 1. With the engine turned off, place the outboard in either the operating position (vertical) or in a tilted position. 2. Remove the flush connector from the bottom cowl. 3. Remove the cover from the flush connector a...
Diagnostic · Cause: Obstruction in the cooling water intake, water pump failure, or blockage in the cooling system Test: Visually inspect the water pump indicator hole for a steady stream of water after engine start; check cooling...
Spec · ½ turn
Procedure · 1. Flush out the outboard cooling system if operating in salt or polluted water. Refer to Flushing the Cooling System. 2. Wash off all salt deposits and flush out the exhaust outlet of the propeller and gearcase with ...
Diagnostic · Cause: Obstruction in water intake holes in lower unit Test: Stop engine and inspect water intake holes in lower unit for obstruction