Specification
Flat washer: Flat washer size (large)
1.500 in conditions={"quantity":"4","position":"d"}
Specification
1.500 in conditions={"quantity":"4","position":"d"}
Open chat with this engine and topic preloaded so you can troubleshoot faster.
Ask Boat Guru about thisProcedure · 1. Use a dial torque wrench to determine transom strength. Tighten the mounting bolt or nut while monitoring the dial reading. 2. If the bolt or nut continues to turn without the torque reading on the dial increasing,...
Diagnostic · Cause: Non-flat or stepped transom mounting surface exceeding 3.17 mm (0.125 in.) tolerance
Spec · 0.875 in conditions={"quantity":"4","position":"b"}
Procedure · 1. Use supplied outboard transom mounting hardware: mounting bolt (½-20 x 4.50 in., Part No. 67755-1), nylon insert locknut (½-20, Part No. 826711-17), flat washer 1.50 in. dia. (Part No. 28421), and flat washer 0.875...
Diagnostic · Cause: Abnormal gear wear inside gearcase Test: Examine drained lubricant for metal particle size and quantity; a small amount is normal, excessive amount or large chips indicates abnormal wear