Specification
Flat washer: Flat washer size (small)
0.875 in conditions={"quantity":"4","position":"b"}
Specification
0.875 in conditions={"quantity":"4","position":"b"}
Open chat with this engine and topic preloaded so you can troubleshoot faster.
Ask Boat Guru about thisProcedure · 1. Use supplied outboard transom mounting hardware: mounting bolt (½-20 x 4.50 in., Part No. 67755-1), nylon insert locknut (½-20, Part No. 826711-17), flat washer 1.50 in. dia. (Part No. 28421), and flat washer 0.875...
Diagnostic · Cause: Non-flat or stepped transom mounting surface exceeding 3.17 mm (0.125 in.) tolerance
Spec · 1.500 in conditions={"quantity":"4","position":"d"}
Procedure · 1. Apply marine sealer to the shank of the outboard mounting bolts (not the threads). WARNING: Do not apply marine sealer to the bolt threads. 2. Install 0.500 in. diameter outboard mounting bolts (x4) with 0.875 in. ...
Diagnostic · Cause: Abnormal gear wear inside gearcase Test: Examine drained lubricant for metal particle size and quantity; a small amount is normal, excessive amount or large chips indicates abnormal wear