Specification
L model outboard: Maximum outboard mounting height (L models)
25 in conditions={"warning":"Exceeding may cause gearcase component damage"}
Specification
25 in conditions={"warning":"Exceeding may cause gearcase component damage"}
Open chat with this engine and topic preloaded so you can troubleshoot faster.
Ask Boat Guru about thisProcedure · 1. Use the mounting height chart (diagram 47710) to determine recommended mounting height based on anticipated maximum boat speed (MPH). The solid reference line (a) is the primary recommendation. 2. For dual outboard...
Diagnostic · Cause: Outboard mounted too high on transom — exceeds maximum mounting height for model Test: Measure mounting height: must not exceed 63.5 cm (25 in.) for L models or 76 cm (30 in.) for XL models
Spec · 63.5 cm conditions={"warning":"Exceeding may cause gearcase component damage"}
Procedure · 1. Before drilling any mounting holes, carefully read Determining Recommended Outboard Mounting Height and install outboard to the nearest recommended mounting height. WARNING: IMPORTANT: Do not skip the mounting heig...
Diagnostic · Cause: Aftermarket accessories (e.g., boarding ladders, shallow water anchors, transom wedge kits, tow sport devices) mounted using the same fasteners that secure the outboard to the transom or jack plate, compromisin...