Specification
Oil drain valve: Oil drain valve torque
15 Nm conditions={"unit_lb_in":"133"}
Specification
15 Nm conditions={"unit_lb_in":"133"}
Open chat with this engine and topic preloaded so you can troubleshoot faster.
Ask Boat Guru about thisProcedure · 1. Tilt the outboard to a vertical position. 2. Use a 16 mm (5/8 in.) wrench and loosen the oil drain valve so that it can be turned by hand. Be careful not to open the valve too far allowing oil to drain. 3. Attach a...
Diagnostic · Cause: Oil contaminated with water Test: Visual inspection of oil on dipstick
Spec · 75 Nm conditions={"lb-ft":"55.3"}
Procedure · 1. Remove the plug from the oil trough and attach a 12 mm (7/16 in.) I.D. drain hose to the fitting. Position the opposite end of the hose into an appropriate container. 2. Unscrew the old filter by turning the filter...
Diagnostic · Cause: Oil contaminated with fuel Test: Olfactory inspection of oil on dipstick