N/A - Oil has a strong fuel smell (N/A)

Related KB links

• Engine oil dipstick: Oil level operating range

  Spec · Within cross-hatched region between bottom bar and top bar conditions={"note":"Do not attempt to fill to the top of the operating range; oil is correct as long as it appears anywhere within the cross-hatched region"}

• Check and top up engine oil level

  Procedure · 1. If the oil level is below the operating range (cross hatched region), remove the oil filler cap and add approximately 500 ml (16 oz) of the specified outboard motor oil. WARNING: Do not try to fill to the upper end...

• Oil filter: Oil filter installation tightening

  Spec · 3/4 to 1 turn after gasket contacts base conditions={"gasket":"Film of clean oil applied, no grease"}

• Oil filter replacement and oil filling

  Procedure · 1. Clean the oil filter mounting base. Apply a film of clean oil to the new filter gasket. Do not use grease. WARNING: Do not use grease on the filter gasket — use clean oil only. 2. Screw the new oil filter on until ...

• N/A - Oil has a milky color

  Diagnostic · Cause: Oil contaminated with water Test: Visual inspection of oil on dipstick