Specification
Oil filter: Oil filter installation tightening
3/4 to 1 turn after gasket contacts base conditions={"gasket":"Film of clean oil applied, no grease"}
Specification
3/4 to 1 turn after gasket contacts base conditions={"gasket":"Film of clean oil applied, no grease"}
Open chat with this engine and topic preloaded so you can troubleshoot faster.
Ask Boat Guru about thisProcedure · 1. Clean the oil filter mounting base. Apply a film of clean oil to the new filter gasket. Do not use grease. WARNING: Do not use grease on the filter gasket — use clean oil only. 2. Screw the new oil filter on until ...
Diagnostic · Cause: Oil contaminated with fuel Test: Olfactory inspection of oil on dipstick
Spec · 58251 conditions={"model":"115 Pro XS","icon_code":"58251"}
Procedure · 1. Remove the plug from the oil trough and attach a 12 mm (7/16 in.) I.D. drain hose to the fitting. Position the opposite end of the hose into an appropriate container. 2. Unscrew the old filter by turning the filter...
Diagnostic · Cause: Oil contaminated with water Test: Visual inspection of oil on dipstick