Specification
Outboard mounting locknuts and bolts: Outboard mounting locknuts and bolts torque – standard boat transom
75 Nm conditions={"application":"Standard boat transom","also_lb_ft":"55"}
Specification
75 Nm conditions={"application":"Standard boat transom","also_lb_ft":"55"}
Open chat with this engine and topic preloaded so you can troubleshoot faster.
Ask Boat Guru about thisProcedure · 1. Determine the strength of the boat transom before mounting the outboard. WARNING: The outboard mounting locknuts and bolts must be able to hold 75 Nm (55 lb-ft) of torque without the boat transom yielding or cracki...
Diagnostic · Cause: Aftermarket accessories (e.g., boarding ladders, shallow water anchors, transom wedge kits, tow sport devices) mounted using the same fasteners that secure the outboard to the transom or jack plate, compromisin...
Spec · 75 Nm conditions={"transom_type":"standard boat transom","alternate_unit_lb_ft":"55.3"}
Procedure · 1. Apply marine sealer to the shank of the outboard mounting bolts (not the threads). WARNING: Do not apply marine sealer to the bolt threads. 2. Install 0.500 in. diameter outboard mounting bolts (x4) with 0.875 in. ...
Diagnostic · Cause: Transom is yielding (insufficient structural strength) Test: Apply dial torque wrench to mounting bolt/nut and observe whether torque value increases with rotation