Specification
Shipping Bracket: Bottom screws torque
70 lb-in
Specification
70 lb-in
Open chat with this engine and topic preloaded so you can troubleshoot faster.
Ask Boat Guru about thisProcedure · 1. Remove the two top screws and loosen the two bottom screws. 2. Slide the shipping bracket off the bottom screws. 3. Tighten the bottom screws to the specified torque. (torque: 7.9 Nm) Tools: Flywheel Puller/Lifting...
Diagnostic · Cause: Boat bottom is dirty or damaged
Spec · 7.9 Nm conditions={"also":"70 lb-in"}
Procedure · 2. Fasten the rigging grommet and rigging adapter with two M6 x 30 screws and one M6 x 50 screw. Tighten the screws to 6 Nm (53 lb-in.). (torque: 6 Nm) 3. Secure the wiring, hoses, and cables together with a cable tie...
Diagnostic · Cause: Gearcase seal or component failure allowing water ingress Test: Visually inspect drained lubricant for water separation or milky discoloration