Procedure
1. Turn the throttle grip to the slow position. 2. Put the shift lever in Neutral (N) position. Run the engine for 2–3 minutes at idling speed if it has been running at full speed. 3. Push the stop switch to stop the engine.
Open chat with this engine and topic preloaded so you can troubleshoot faster.
Ask Boat Guru about thisSpec · Thermostat controlled
Diagnostic · Cause: Faulty lanyard stop switch Test: Start the engine and stop it by pulling the lanyard cord; if the engine does not stop, the switch requires repair
Spec · 4500–5500 conditions={"throttle":"wide-open"}
Procedure · 1. Turn the throttle grip to reduce engine speed to trolling (or idling) speed. WARNING: Personal injury and/or equipment damage may occur if shifting at high speed. Engine must be in the slow running position before ...
Diagnostic · Cause: Fuel flooding Test: Push in choke knob, wait 30 seconds, then continue cranking