Procedure
Storing the Outboard for Transport
1. Lay the outboard down on its back side so the tiller handle is facing up. Place a protective pad under the outboard. 2. Close the fuel tank vent.
Procedure
1. Lay the outboard down on its back side so the tiller handle is facing up. Place a protective pad under the outboard. 2. Close the fuel tank vent.
Open chat with this engine and topic preloaded so you can troubleshoot faster.
Ask Boat Guru about thisSpec · Thermostat controlled
Diagnostic · Cause: Other accessories (e.g., tow sport bars, boarding ladders) mounted to the boat using the outboard's provided fasteners Test: Inspect transom mounting hardware to confirm it is used exclusively for securing the ...
Spec · 10 % conditions={"reason":"Allow for fuel expansion with rising temperature"}
Procedure · 1. Store outboard in an upright (vertical) position to allow water to drain out of the outboard. WARNING: Do NOT store the outboard in a tilted position. Water trapped in the cooling passages or rain water collected i...
Diagnostic · Cause: Improper installation of the outboard on the transom Test: Verify outboard is mounted per Mercury Marine validated fastener instructions and torque specifications