Procedure
1. Once the outboard is recovered from the water, transport it to an authorized dealer for service within a few hours. WARNING: Immediate service is necessary once the engine is exposed to the atmosphere to minimize internal corrosion damage.
Open chat with this engine and topic preloaded so you can troubleshoot faster.
Ask Boat Guru about thisSpec · ~15 degrees conditions={"operation":"Release from shallow water drive to run position"}
Diagnostic · Cause: Improper installation of the outboard on the transom Test: Verify outboard is mounted per Mercury Marine validated fastener instructions and torque specifications
Spec · Thermostat controlled
Procedure · 1. Keep the outboard tilted down at all times so the gearcase is submerged when moored in freezing or near-freezing temperatures. This prevents trapped water in the gearcase from freezing and damaging the water pump a...
Diagnostic · Cause: Insufficient ventilation, enclosed cabin/cockpit, or proximity to exhaust areas while engine is running Test: Check ventilation of passenger area; inspect for enclosed or canvas-covered spaces with inadequate a...